ACH-P "Mist Lynx 2.0" (1xcERPPC, 2xcERSL, cECM)
5/5,

1 rating

Thread in 'Arctic Cheetah Omni Builds' started by ArchAngel Alpha, Jul 21, 2015.

  1. ArchAngel Alpha

    ArchAngel Alpha Junior Member

    42
    11
    12


    Everything the Mist Lynx has, but a little more:
    ERPPC check, Better hardpoints check, more tonnage check, ecm check, non-horrid ecm placement check.

    Have fun
     
  2. Aylek

    Aylek Administrator Staff Member

    2,761
    528
    197
    I'd use the C right torso for the ERPPC: high mount and -2.5% heat generation. I'd also strip the RA's armor completely as well as some additional armor from various zones and add an additional DHS:

     
  3. ArchAngel Alpha

    ArchAngel Alpha Junior Member

    42
    11
    12
    I see...unfortunately I didn't purchase in time to get the 4 bonus mechs, so I'm working with what I got, thanks for the input though
     
  4. Aylek

    Aylek Administrator Staff Member

    2,761
    528
    197
    [​IMG]

    With this build, 3/8 basic skills unlocked:

     
  5. Aylek

    Aylek Administrator Staff Member

    2,761
    528
    197
  6. Motörhead

    Motörhead Benefactor

    1,127
    248
    58


    Would go with 3, no real downsides.
     
  7. Aylek

    Aylek Administrator Staff Member

    2,761
    528
    197
    You're loosing a FULL shield side and quite some heat efficiency that way.
     
  8. Motörhead

    Motörhead Benefactor

    1,127
    248
    58
    I have never shielded with a light arm with a good success rate, are ACH hitboxes that OP(I miss firestarters too, coincidentially those considered most broken with hitboxes) ? :D
     
  9. Aylek

    Aylek Administrator Staff Member

    2,761
    528
    197
    You can use the whole right side including the right torso for shielding here. That's worth a lot more than an additional cERSLas. Damn clan XL engines...
     
  10. Motörhead

    Motörhead Benefactor

    1,127
    248
    58
    For some reason I thought only the right torso had an high energy mount.
    I noticed now that also the ECM side has the high mount, so all on the same side is definitely better.
     
  11. dranozir

    dranozir MechSpecs Addict

    987
    113
    43


    Not bad this build.
     
  12. Emberdrake

    Emberdrake Active Member

    64
    10
    18
    5/5,
    Good build at best, but the real factor is in how much fun it is to play!
     
top-fast
top-fast
top-fast
top-fast