Flame The Warpony (1x AC10, 4x MPLas, AMS, XL300)

Thread in 'Flame' started by Pwnanza31, Jun 8, 2013.

  1. Pwnanza31

    Pwnanza31 New Member

    9
    0
    2
    Variant A

    My own take on the FLAME, tried using the LB 10x but meh, I dont really like it and prefer my AC/10, never really overheats as long as you use heat management skills.


    Variant B


    Used this to TREMENDOUS success!!
     
    Last edited by a moderator: Oct 8, 2014
  2. BindMind

    BindMind Advanced Member

    322
    1
    25
    I was going to say something like "You should use a larger engine", but since you're using an AC/10 rather than an LB 10-X I think what you have here is great. I can't really think of anything that can be improved with this build.

    5 stars for you :)
     
  3. Pwnanza31

    Pwnanza31 New Member

    9
    0
    2
    Haha why thank you sir, this is just the second mech I use. the other is my Raven 3-L except I actually run the optimized build for competitive play. First 5 start build Woohoo! haha
     
  4. BindMind

    BindMind Advanced Member

    322
    1
    25
    Wow, some stingy bastard gave you a 1 star rating...
     
  5. Pwnanza31

    Pwnanza31 New Member

    9
    0
    2
    I Wonder why in the world someone would do that :(
     
  6. Marec

    Marec Well-Known Member

    235
    0
    24
    My guess would be that he don't like the AC10 - I don't like it myself, seems to be the low damage brother of the AC20 and the slow fire cousin of the AC5.
    I ran them on a Jager for a bit but it just didn't seem to be worth the tonnage.
    They seem to work for you tho.
     
  7. Pwnanza31

    Pwnanza31 New Member

    9
    0
    2
    Well I could argue the same thing with the LB 10x except with that you need to be super close

    Here is the latest success with Variant B and yes I was doing a for man with the A.C.E.S and Zaku
    [​IMG]
     
  8. Red Line Pilot

    Red Line Pilot Active Member

    91
    2
    15
    I like this. I was running that second variant for a while. The dragon is such an agile mech when it has that big engine.

    On the other hand, when i look at the first variant, 4 tons in pulse lasers instead of regular lasers can also be used for SRMs. Im not sure what gives a better alpha strike (since that is what you take the pulses for i guess). 4 pulses give 4 more pin point damage than 4 regular. A srm4 or srm6 gives 8 or 12 damage spread out.

    I think i'd prefer the srm variant over the pulse laser variant of the flame.
     
  9. Pwnanza31

    Pwnanza31 New Member

    9
    0
    2
    Sorry for supper late reply to this thread. I did use an srm variant for the flame before but I just idnt feel the srm's doing the damage plus the srms are not pinpoint and neither is the lb-10x. The AC/10 does wonderfully when used after with medium pulse lasers. Not many parts on a mech can take a 16 shots of medium pulse lasers (4 salvos of the 4 medium pulses on the mech) , plus the 2 AC/10 shots I will up for the within me shooting 4 medium pulse laser alpha strikes 4 times. Now if you can aim consistently that's pretty damn good.
     
top-fast
top-fast
top-fast
top-fast